Precautions when installing Kitchen Mixer Faucet:

(01) Do not install the cold and hot water supply pipes backwards. -Under normal circumstances, the left side facing the faucet is the hot water supply pipe, and the right side is the cold water supply pipe. Unless otherwise specified.

(02) After the installation is completed, remove the clogged accessories such as the bubbler and the shower, let the water flow out, completely remove the impurities, and then put them back.

(03) When disassembling the water inlet hose, do not wrap the sealing tape, do not use a wrench, just tighten it by hand, otherwise the hose will be damaged.

(04) For the wall-mounted Single Cold Kitchen Faucet, determine the exposed length of the elbow according to the needs, otherwise the elbow will expose too much of the wall, which will affect the appearance.

(05), try to install the faucet before installing the washbasin, bidet, washbasin, and bathtub.

(06) For thermostatic faucets, the recommended static pressure of hot and cold water supply is 3 bar (0.3MPa), and the minimum water supply pressure is 0.5 bar (0.05MPa). The pressure difference between hot and cold water supply is not greater than 2 bar (0.2MPa). If the water supply pressure is greater than 5 bar (0.5MPa), please install a pressure reducing valve.

(07) For thermostatic faucets, the hot water supply temperature range is 50°C-80°C, and the recommended hot water supply temperature is 65°C.

(08). For the wall-mounted Kitchen Faucet, if it is necessary to perform heating welding, the valve core and other plastic and rubber parts must be removed first.

(09). For the wall-mounted faucet, please remove the protective cover at the right time (see the instruction manual).

(10) For the wall-mounted faucet, in order to ensure the normal operation of the aspirator, the inner diameter of all connecting pipes and pipe fittings between the faucet body and the bathtub outlet should not be less than 12mm.

(11) Before installing the wall-mounted faucet, select the pipeline thread according to the valve body, water outlet and shower thread specifications indicated in the manual.

(12) For the wall-mounted faucet, determine the depth of the faucet buried in the wall according to the instruction manual.